SJE-Rhombus Micromaster Plus Pump Switch w/10ft cable, no plug

Description:  The SJE float switches are activated by a float that is attached to the pump by a flexible tether that can be adjusted so the pump starts and stops automatically at preset levels. They require more space to operate compared to vertical float switches since the flexible tether moves in an arc as the water level rises and falls in the sump basin.Sump and sewage float switches have a float that raises and lowers depending on the water level in the sump basin to automatically control switch operation. When water rises to a preset level in the sump basin the switch turns on and the pump starts. When the water is drained down the switch turns off and the pump stops.

Specs:

CABLE: flexible 18 gauge, 2 conductor (UL) SJOW, water-resistant (CPE)

FLOAT: 2.74 inch diameter x 4.83 inch long (7 x 12.3 cm), high impact, corrosion resistant polypropylene for use in sewage and water up to 140° F (60° C)

MAXIMUM WATER DEPTH: 30 feet (9 meters), 13 psi

ELECTRICAL: 5 amp, 125/250 VAC, 50/60 Hz

This switch is not recommended for controlling:

1.  Electric loads less than 100 milliamps, 12 VAC
2. Non-arcing electric loads 

Note: No Returns on items over 30 days.